Omron fq2 User Manual page 371

Set Image Adjustment Data
This command sets parameters or measurement values from a position compensation item or filter item.
<Command Format>
Command
P O S I T I
or
P D
Command
Space Space
(0x20) (0x20)
Item
Space
number
(0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Inspection item number
External reference data
number
Set value
FQ2 User's Manual Controlling Operation and Outputting Data with TCP No-protocol Communications
O N D A T A
Space
(0x20)
External
Set value
reference data
(4 digits max.)
Space
(0x20)
Specifies the item number of the position compensation item or of the filter item.
Specifies the external reference data number.
12-2 External Reference Parameters: p. 430
Specifies the set value.
12-2 External Reference Parameters: p. 430
External reference data
(4 digits max.)
Item
number
Space Space
(0x20) (0x20)
CR
Delimiter
Set value
CR
Space
Delimiter
(0x20)
369