HP netserver e 800 Service Manual page 78

Chapter 6
Air Duct
Latch
6. Unplug the power and SCSI or IDE cables to any hard disk drives already in the cage.
7. Loosen three captive screws on the mass storage cage.
8. Remove the cage.
72
Channel B
Top of HP NetServer
Hard Disk
Drive Cage
Captive Screws Holding the Mass Storage Cage
Latch Opening
Channel A
Moving the Air Duct
Side View
Replacing Parts
Shelf 1
Shelf 2
Shelf 3
Captive
Screws (3)
Shelves 4-7(4)
Cable Clamp
Front of
HP NetServer
Screws (3)