Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 61

OpenBoot PROM Messages and Their Meaning (Continued)
TABLE 3-2
Message
Can't open boot device
Can't run OBDIAG from the
device tree node or with the
active instance
x
NOTICE - CPU Bank
from different vendors.
NOTICE - CPU x Bank
different architectures and
will not be used.
Searching for self-test methods
. . . Rejecting alloc-mem!
Starting xv-500 self-test
The process "cs00.sh" has been
exited with retcode#256
Timeout waiting for ARP/RARP
packet
/usr/bin/ps/getexecname () has
failed
Meaning
The device specified for
boot is unavailable.
Attempt to run OpenBoot
Diagnostics from a selected
device node.
y A pair of DIMMs are each
DIMMs are
from different
manufacturers.
y DIMMs have A pair of DIMMs are each
of different architectures.
The DIMMs are not used.
OpenBoot Diagnostics
failed to start. Some devices
might be tied to other
processes.
Sun XVR-1200 PROM error.
The battery has drained.
Network connection
problem.
The battery has drained.
What to Do
• For hard drive, check
internal connections. Drive
might be corrupted. See
"Hard Drive Problem" on
page 4-8.
• For optical drive, check that
disc is bootable. Check
internal connections. See
"Optical Drive Problem" on
page 4-25.
• For network, check network
connections. Check boot
server. See "Network
Problem" on page
Type:
ok
unselect-dev
Install DIMMs in identical
pairs. See "Replacing the
DIMMs" on page 11-2.
Install DIMMs in identical
pairs. See "Replacing the
DIMMs" on page 11-2.
Type:
ok
unselect-dev
Type:
ok show-devs
search for the text: xvr-1200
Replace the battery. See
"Replacing the Battery" on
page 11-22.
Check network connection.
See "Network Problem" on
page 4-17.
Replace the battery. See
"Replacing the Battery" on
page 11-22.
Chapter 3 Basic Troubleshooting
4-17.
3-7