Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 100

E
Is the
connector on the monitor
signal cable good?
Y
Is the connector
on the graphics
accelerator good?
Y
Does the monitor have
a multi-input switch?
Y
Set the switch to differ-
ent positions.
Did this solve
the problem?
Y
Return to "Power-On
Flowchart" on page 4-3.
FIGURE 4-13
4-16 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
N
N
N
N
Check the graphics accel-
erator. See "PCI Card
Problem" on page 4-28.
Monitor Problem (Continued)
Replace the graphics
accelerator. See "Replac-
ing the PCI Cards" on
page 11-28.
Replace monitor signal
cable.