If you lifted the DIMM cooling duct prior to installing DIMMs, return to
■
"Installing DIMMs" on page
If you lifted the DIMM cooling duct prior to removing the CPU fan and heat sink
■
assembly, return to
page 11-13
If you lifted the DIMM cooling duct prior to installing the CPU fan and heat sink
■
assembly, return to
page
Otherwise, continue to
■
7. Release the desired DIMM.
Simultaneously press down on both ejector levers at the ends of the DIMM to unlock
the DIMM from the DIMM slot. See
FIGURE 11-6
8. Lift the DIMM straight out of the DIMM slot.
See
FIGURE 11-7
11-6
Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
Step 6
of
.
Step 4
of
11-18.
Step
Removing the DIMM
.
11-7.
"Replacing the CPU Fan and Heat Sink Assembly" on
"Installing the CPU Fan and Heat Sink Assembly" on
7.
.
FIGURE 11-6
Step 4
of