Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 158

post max max Output Comparison (Continued)
TABLE 7-7
Output Displayed
0>@(#) Sun Blade[TM] 1500 POST 4.16.3 2004/11/05 19:58
/dat/fw/common-source/firmware_re/post/post-build-
4.16.3/Fiesta/taco/integrated
0>Copyright © 2004 Sun Microsystems, Inc. All rights reserved
SUN PROPRIETARY/CONFIDENTIAL.
Use is subject to license terms.
0>Soft Power-on RST thru SW
0>OBP->POST Call with %o0=00001000.01014000.
0>Diag level set to MAX.
0>Verbosity level set to MAX.
0>MFG scrpt mode set NORM
0>I/O port set to TTYA.
0>Start Selftest.....
0>CPUs present in system: 0
0>Test CPU(s).....
0>Init SB
0>Initialize I2C Controller
0>Init CPU
0>DMMU
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Init mmu regs
0>Setup L2 Cache
0>L2 Cache Control = 00000000.00f04400
0> Size = 00000000.00100000...
0>L2 Cache Tags Test
0>Scrub and Setup L2 Cache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test Mailbox
0>Scrub Mailbox
0>CPU Tick and Tick Compare Registers Test
0>CPU Stick and Stick Compare Registers Test
0>Set Timing
0> UltraSPARC[TM] IIIi, Version 3.4
0>Interrupt Crosscall.....
0>Setup Int Handlers
7-14 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
(firmware_re)
What Is Happening
POST build version and date is
displayed.
POST build path is displayed.
Copyright and license displayed.
CPU0 is acknowledged and POST
configuration is read from
register.
CPU, I/O bridge, data memory
management unit (DMMU), and
instruction memory management
unit (IMMU) are initialized.
L2 cache is set up and scrubbed
(data values set to defaults).
DMMU is set up.
Mailbox register is checked and
initialized.
Operation of TICK registers is
verified.
Operation of STICK registers is
verified.
Motherboard timing is to be
configured.
CPU version is identified.
Interrupt handlers are set up.