Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 293

Removing the Smart Card Reader
FIGURE 12-16
6. If you removed the smart card reader bracket to replace the interface cable, return
to Step 3 of "Removing the Smart Card Reader Cable" on page
7. Remove the interface cable from the smart card reader.
See . Set the cable aside.
FIGURE 12-17
Interface cable
Removing Smart Card Reader Interface Cable
FIGURE 12-17
8. Using a No. 2 Phillips screwdriver, remove the two screws that secure the smart
card reader to its bracket.
See . Set the screws aside in a container.
FIGURE 12-17
Drive rails (2)
Screws (2)
Tabs (2)
Smart card reader
Bracket
Chapter 12 Replacing Storage Devices
14-4.
12-19