Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 258

FIGURE 11-40
13. If you installed a PCI card into slot PCI4, install the chassis cross brace according
to the procedure in
14. If you installed PCI cards after installing the motherboard, return to
"Installing the Motherboard" on page
15. Swing the PCI card support back down into the chassis.
16. Align the center of the PCI card support fingers with each PCI card.
17. Press the PCI card support toward the motherboard until it clicks in place, fully
closed.
See
FIGURE 11-41
11-42 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
Screw
Fastening the PCI Card Retainer
"Installing the Chassis Cross Brace" on page
.
11-50.
13-53.
Step 15 of