Print Is Too Dark - Lexmark X790 Series User Manual

Troubleshooting
C
HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1
From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
2
Before sending the print job, specify the correct paper type setting:
• For Windows users, specify the paper type from Print Properties.
• For Macintosh users, specify the paper type from the Print dialog.
A
VOID TEXTURED PAPER WITH ROUGH FINISHES
M
AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE
Replace the worn or defective print cartridge.
M
AKE SURE THE TRANSFER BELT IS NOT DEFECTIVE
Replace the defective transfer belt. For more information, see the instruction sheet that came with the replacement
part.
M
AKE SURE THE FUSER IS NOT DEFECTIVE
Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.

Print is too dark

Try one or more of the following:
L
OAD PAPER FROM A FRESH PACKAGE
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.
A
VOID TEXTURED PAPER WITH ROUGH FINISHES
C P T
HECK THE APER YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray or feeder:
•
From the printer control panel Paper menu, check the Paper Type setting.
•
For Windows users, check this setting from Print Properties.
281