Lexmark X790 Series User Manual page 176

Understanding the printer menus
Use
Automatic Redial
0–9
Redial frequency
1–200
Behind a PABX
Yes
No
Enable ECM
Yes
No
Enable Fax Scans
On
Off
Driver to fax
Yes
No
Allow Save as Shortcut
On
Off
Dial Mode
Tone
Pulse
Max Speed
2400
4800
9600
14400
33600
Custom Job scanning
On
Off
Scan Preview
On
Off
Background Removal
‑4 to 4
To
Specify the number of times the printer tries to send the fax to a specified number.
Note: 5 is the factory default setting.
Specify the number of minutes between redials.
Note: 3 is the factory default setting.
Enable or disable switchboard blind dialing without a dial tone.
Note: No is the factory default setting.
Enable or disable Error Correction Mode for fax jobs.
Note: Yes is the factory default setting.
Fax files that are scanned at the printer.
Note: On is the factory default setting.
Allow the print driver to send fax jobs.
Note: Yes is the factory default setting.
Save fax numbers as shortcuts in the printer.
Note: On is the factory default setting.
Specify the dialing sound.
Note: Tone is the factory default setting.
Specify the maximum speed in baud at which faxes are sent.
Note: 33600 is the factory default setting.
Scan a document that contains mixed paper sizes into a single file.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk is
installed.
Show whether a preview appears on the display for scan jobs.
Notes:
•
Off is the factory default setting.
• This menu item appears only when a formatted, working printer hard disk is
installed.
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
176