Lexmark X790 Series User Manual page 172

Understanding the printer menus
Use
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Sample Copy
Off
On
To
Specify which color to drop and to adjust the dropout setting for each color threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast of the output.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a copy.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Note: Auto is the factory default setting.
Specify if the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Create a sample copy of the original document.
Note: Off is the factory default setting.
172