Custom Names Menu; Custom Bin Names Menu; Universal Setup Menu - Lexmark M5100 Series User Manual

Understanding the printer menus
Use
Recycled
Paper
Card Stock
Transparency
Rough/Cotton
Labels
Vinyl Labels
Envelope

Custom Names menu

Use
Custom Name [x]

Custom Bin Names menu

Use
Standard Bin
Bin [x]

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–216 mm
To
Specify a paper type when Recycled is selected in other menus.
Notes:
•
Paper is the factory default setting.
•
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
To
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
To
Specify a custom name for the standard bin.
Specify a custom name for Bin [x].
To
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
• Millimeters is the international factory default setting.
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase the
width in 0.01‑inch increments.
• 216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
163