Ii-3-4 Port Triggering - Draytek Vigor3220 SERIES User Manual

I I - 3 - 4 P o
I I - 3 - 4 P o
Port Triggering is a variation of open ports function.
The key difference between "open port" and "port triggering" is:
Once the OK button is clicked and the configuration has taken effect, "open port" keeps

the ports opened forever.
Once the OK button is clicked and the configuration has taken effect, "port triggering"

will only attempt to open the ports once the triggering conditions are met.
The duration that these ports are opened depends on the type of protocol used. The

"default" durations are shown below and these duration values can be modified via
telnet commands.
TCP: 86400 sec.
UDP: 180 sec.
IGMP: 10 sec.
TCP WWW: 60 sec.
TCP SYN: 60 sec.
Available settings are explained as follows:
Item
Comment
Triggering Protocol
Triggering Port
Incoming Protocol
Incoming Port
Status
Click the index number link to open the configuration page.
Vigor3220 Series User's Guide
r t T r i g g e r i n g
r t T r i g g e r i n g
Description
Display the text which memorizes the application of this
rule.
Display the protocol of the triggering packets.
Display the port of the triggering packets.
Display the protocol for the incoming data of such triggering
profile.
Display the port for the incoming data of such triggering
profile.
Display if the rule is active or de-active.
123