Table of Contents
Advertisement
HA enabled
the same Redundancy method
the same Group ID
the same Authentication Key
the same Management Interface
Open Diagnostics>>High Availablity Status.
Available settings are explained as follows:
Item
Details/Back
HA Setup
Renew
Refresh
Status
Router Name
IPv4
State
Stable
WAN
Config Sync Status
Vigor3220 Series User's Guide
Description
Details – Click it to display detailed status about HA
configuration for the selected router.
Back – Return to previous page.
Click it to open Applications>>High Availability for modifying
the configuration.
Click it to get the newest status of other router (except the
primary router).
Click it to get the newest status of the primary router.
"!" means an error has occurred. Refer to Detailed
information and modify HA settings if required.
Display the name of the device.
Display the IPv4 address of such router.
"Down" means the function of HA is disabled.
"Primary" means such router stands for the primary router in
HA.
"Secondary" means such router stands for the secondary
router in HA.
"No" means the primary router has not been determined yet.
DARP is negotiating.
"YES" means the primary router is determined.
"At Least One UP" means that at least one WAN interface
connects to Internet.
"All WANs Down" means that no WAN interface connects to
Internet.
"Not Ready" means configuration synchronization is unable to
execute, or configuration synchronization is disabled, or
synchronization initialization executes but fails.
"Ready" means configuration synchronization is ready to
execute.
"Progressing" means configuration synchronization is
493
Advertisement
Table of Contents
