Table of Contents
Advertisement
Available settings are explained as follows:
Item
Name
Common Name Identifier
Additional Filter
Base Distinguished Name
/ Group Distinguished
Name
After finished the above settings, click OK to save and exit this page. A new profile has been
created.
For detailed information about LDAP application, refer to section 4.6 How to Implement the
AD/LDAP Authentication for User Management?
142
Description
Type a name for such profile. The length of the user name is
limited to 19 characters.
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is "cn".
Type the condition for additional filter.
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it's
too long. Then you may click the
account information on the AD/LDAP Server to assist you finish
the setup.
button to list all the
Vigor3220 Series User's Guide
Advertisement
Table of Contents
