Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable
Bind Type
Server Address
Destination Port
Use SSL
Regular DN
Regular Password
After finished the above settings, click OK button to save the settings.
P
r
o
f
i
l
e
s
P
r
o
f
i
l
e
s
You can configure eight AD/LDAP profiles. These profiles would be used with User
Management for different purposes in management.
Click any index number link to open the following page.
Vigor3220 Series User's Guide
Description
Check to enable such function.
There are three types of bind type supported.
Simple Mode – Just simply do the bind authentication
without any search action.
Anonymous – Perform a search action first with
Anonymous account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check
if you have the search authority.
For the regular mode, you'll need to type in the Regular DN
and Regular Password.
Enter the IP address of LDAP server.
Type a port number as the destination port for LDAP server.
Check the box to use the port number specified for SSL.
Type this setting if Regular Mode is selected as Bind Type.
Specify a password if Regular Mode is selected as Bind Type.
141
Advertisement
Table of Contents
