Table of Contents
Advertisement
Info
After finished the above settings, click OK to save the settings.
I
I
-
1
-
1
-
1
W
I
I
-
1
-
1
-
1
W
Ethernet is the Physical Mode for WAN1 to WAN4.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
Line Speed
VLAN Tag insertion
Vigor3220 Series User's Guide
WAN when it is disabled.
In default, each WAN port is enabled.
A
N
1
~
W
A
N
4
(
E
t
h
e
A
N
1
~
W
A
N
4
(
E
t
h
e
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for
WAN1/WAN2/WAN3/WAN4 or choose Auto negotiation for
determined by the system.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
r
n
e
t
)
r
n
e
t
)
49
Advertisement
Table of Contents
