Table of Contents
Advertisement
V
I
-
1
-
1
3
V
I
-
1
-
1
3
There are three ways to activate WCF on vigor router, using Service Activation Wizard, by
means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation.
After you have finished the setting profiles for WCF (refer to Web Content Filter Profile), it is
the time to activate the mechanism for your computer.
Click System Maintenance>>Activation to open the following page for accessing
http://myvigor.draytek.com.
Available settings are explained as follows:
Item
Activate via Interface
Activate
Authentication Message
Below shows the successful activation of Web Content Filter:
370
A
c
t
i
v
a
t
i
o
n
A
c
t
i
v
a
t
i
o
n
Description
Choose WAN interface used by such device for activating Web
Content Filter.
The Activate link brings you accessing into www.vigorpro.com
to finish the activation of the account and the router.
As for authentication information of web filter, the process of
authenticating will be displayed on this field for your
reference.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
