Table of Contents
Advertisement
Administrator LDAP
Setting
When you click OK, the login window will appear. Please use the new password to access into
the web user interface again.
350
Password – Type the password for the local user.
Confirm Password – Type the password again for
confirmation.
Add – After typing the user name and password above, simply
click it to create a new local user. The new one will be shown
on the Local User List immediately.
Edit – If the username listed on the box above is not
satisfied, simply click the username and modify it on the
field of User Name. Later, click Edit to update the
information.
Delete – If the local user listed on the box above is not
satisfied, simply click the username and click Delete to
remove it.
Enable Admin Login From Wan – The default setting is
enabled. It can ensure that any user is able to successfully
accesses into web user interface of Vigor router through
Internet by username/password of "admin/admin".
Enable LDAP/AD login for Admin users – If it is enabled, any
user can access into the web user interface of Vigor router
through the LDAP server authentication.
Enable Admin Login From Wan – The default setting is
enabled. It can ensure that any user is able to successfully
accesses into web user interface of Vigor router through
Internet by username/password of "admin/admin".
LDAP Server Profiles – Available profiles will be displayed
here under the link of LDAP Profile Setup.
LDAP Profile Setup – It allows you to create a new LDAP
profile.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
