Table of Contents
Advertisement
Fragments
Filter
Branch to other Filter Set
Sessions Control
MAC Bind IP
Quality of Service
User Management
304
indicates a range for the port and available for this service
type.
(!=) – when the first and last value are the same, it indicates
all the ports except the port defined here; when the first and
last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this
profile.
Service Group/Object - Use the drop down list to choose the
one that you want.
Specify the action for fragmented packets. And it is used for
Data Filter only.
Don't care -No action will be taken towards fragmented
packets.
Unfragmented -Apply the rule to unfragmented packets.
Fragmented - Apply the rule to fragmented packets.
Too Short - Apply the rule only to packets that are too short
to contain a complete header.
Specifies the action to be taken when packets match the
rule.
Block Immediately - Packets matching the rule will be
dropped immediately.
Pass Immediately - Packets matching the rule will be passed
immediately.
Block If No Further Match - A packet matching the rule, and
that does not match further rules, will be dropped.
Pass If No Further Match - A packet matching the rule, and
that does not match further rules, will be passed through.
If the packet matches the filter rule, the next filter rule will
branch to the specified filter set. Select next filter rule to
branch from the drop-down menu. Be aware that the router
will apply the specified filter rule for ever and will not return
to previous filter rule any more.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.
Strict –Make the MAC address and IP address settings
configured in IP Object for Source IP and Destination IP are
bound for applying such filter rule.
No-Strict - no limitation.
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Such item is available only when Rule-Based is selected in
Vigor3220 Series User's Guide
Advertisement
Table of Contents
