Table of Contents
Advertisement
Active Mode
Active When
After finished the above settings, click OK to save the settings.
I
I
-
1
-
1
-
2
W
I
I
-
1
-
1
-
2
W
To use 3G/4G network connection through 3G/4G USB Modem, please configure WAN3 or
WAN4 interface.
Available settings are explained as follows:
Item
Enable
Display Name
50
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Choose Always On to make the WAN1/WAN2/WAN3/WAN4
connection being activated always.
Load Balance: Check this box to enable auto load balance
function for such WAN interface.
When the data traffic is large, the WAN interface with the
function enabled will balance the data transmission
automatically among all of the WAN interfaces in
connection status.
If you choose Failover as the Active Mode, the option of
Active When will appear.
A
N
5
(
U
S
B
)
A
N
5
(
U
S
B
)
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Any of the selected WAN disconnect – Such WAN
connection will be activated when any selected WAN
interface (checked below) disconnects.
All of the selected WAN disconnect – Such WAN
connection will be activated only when all of selected
WAN interfaces (checked below) disconnect.
Check boxes for WAN1 to WAN5 – Specify the WAN
interface by checking the WAN box.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
