1.3
Camera Feature Locations
1.3.1
Front View
Indicator Display
Not on the LAN
Power
on
Normal Operation*
Automatic
Setup
Finished setting
Using
Getting IP address*
DHCP
Got IP address
Updating Firmware
Pressing FACTORY
DEFAULT RESET button
TM
UPnP
Internal Failure
*
The indicator turns orange if the camera is not connected to the LAN.
1
*
The indicator blinks orange if the camera is not connected to the LAN.
2
*
See page 45.
3
Lens Cover
Lens (0.5 m—Unlimited)
Indicator
The indicator color shows camera status.
Microphone
The microphone picks up audio around the camera.
(See page 38 of the Operating Instructions on the
Setup CD-ROM)
On the LAN
Orange blinking
1
Setting
2
Failure
Orange blinking
Green
Green blinking
Green blinking
Green blinking
Green
Orange blinking
Orange blinking
(The camera restarts after that.)
Orange blinking (About a 2-second interval)
Red blinking*
Installation/Troubleshooting
Green blinking
Green
Turning off
3
Green
11