Connecting The Camera To A Router Supporting Upnp™ (Ipv4 Only) - Panasonic BB-HCM331 Installation/Troubleshooting Manual

Installation/Troubleshooting
1.8 Connecting the Camera to a Router
Supporting UPnP™ (IPv4 Only)
To allow access from the Internet with a router supporting UPnP
procedures shown on page 20.
Notes
• In some routers, the UPnP
router's UPnP
camera. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details.
• If the maximum idle time is set in PPPoE or PPTP connection with your
ISP, disable it on the router. See the router manual for details.
26
feature is disabled by default. Enable your
TM
feature following the router manual before you set up the
TM
, follow the
TM