Camera Feature Locations; Front View - Panasonic BL-C10A Installation/Troubleshooting Manual

Installation/Troubleshooting

1.2 Camera Feature Locations

1.2.1

Front View

Privacy Button
To temporarily deactivate the camera, press the privacy button. Once pressed, the
button changes from green to red. The video will be temporarily turned off, camera
features become unresponsive and the viewed image turns to a gray screen. To
return to normal operation, press the privacy button again. It should turn green
within a few seconds. To restore video, click [Refresh] on the web browser. Privacy
mode can also be controlled from mobile phones or PCs (see page 24 or page 70
of the Operating Instructions in the Setup CD-ROM).
Indicator Display
Power
on
Normal Operation*
Automatic
Setup
Using
DHCP
Updating Firmware
Pressing FACTORY
DEFAULT RESET button
UPnP Failure
In Privacy Mode
Internal Failure
1
* The indicator turns orange if the camera is not connected to the LAN.
2
* The indicator blinks orange if the camera is not connected to the LAN.
6
Pan/tilt Part
Do not apply pressure to the pan/tilt portion of the
camera. Any forced movement can damage the internal
mechanism.
Indicator/Privacy Button
Pyroelectric Infrared Sensor (see Getting Started)
Not on the LAN
On the LAN
1
Setting
Finished setting
Getting IP address*
Got IP address
Orange
Orange Orange and green blinking
Green blinking
2
Green blinking
Orange blinking
Orange blinking
(The camera restarts after that.)
Orange blinking (About a 2-second interval)
Orange blinking
Green
Green
Green
Turning off
Red
Red blinking
Green