Camera Feature Locations; Front View - Panasonic BL-C30A Installation And Troubleshooting Instructions

1.2

Camera Feature Locations

1.2.1

Front View

Privacy Button
To temporarily deactivate the camera, press the privacy button. Once pressed, the
button changes from green to red. The video will be temporarily turned off, camera
features become unresponsive and the viewed image turns to a gray screen. To
return to normal operation, press the privacy button again. It should turn green
within a few seconds. To restore video, click [Refresh] on the web browser. Privacy
mode can also be controlled from mobile phones or PCs (see page or page of the
Operating Instructions in the Setup CD-ROM).
Indicator Display
Not on the LAN
Power
on
Normal Operation*
Automatic
Setup
Finished setting
Using Getting IP address*
DHCP
Got IP address
Updating Firmware
Pressing FACTORY
DEFAULT RESET button
UPnP Failure
In Privacy Mode
Internal Failure
1
* The indicator turns orange if the camera is not connected to the LAN.
2
* The indicator blinks orange if the camera is not connected to the LAN.
Antenna
Pan/tilt Part
Do not apply pressure to the pan/tilt portion of the
camera. Any forced movement can damage the internal
mechanism.
Indicator/Privacy Button
Pyroelectric Infrared Sensor (see Getting Started)
On the LAN Orange
1
Setting
2
Orange
Orange and green blinking
Green
Green blinking
Green
Green blinking
Green
Orange blinking
Orange blinking
(The camera restarts after that.)
Orange blinking (About a 2-second interval)
Red blinking
Installation/Troubleshooting
Orange blinking
Turning off
Red
Green
7