Installing The Camera - Panasonic BB-HCM331 Installation/Troubleshooting Manual

Installation/Troubleshooting

1.13 Installing the Camera

The camera has a splash resistant body. The splash resistant body allows the
camera to be used indoors and outdoors. Waterproof cabling is necessary for
outdoor mounting. Check the camera operation before installing (cabling and
mounting) the camera.
Notes
• Install the camera under eaves to protect it from direct sunlight. Prolonged
exposure to direct sunlight or halogen light may damage the CCD sensor.
• Use the sunshade in any conditions.
• Do not install the camera in the location where sea breezes may hit the
unit directly.
• Avoid laying Ethernet cable underground or stringing it in the air. Lightning
may cause serious damage to the camera or the connected devices.
• AC adaptor and AC cord are not waterproofed. Put them inside the
outdoor power equipment near the camera and protect them from the rain.
Ask the authorized electric wiring dealer.
• To use the AC adaptor, AC cord and Ethernet cable outside, waterproof
electric wiring work should be performed.
• Do not expose the AC adaptor to the temperatures below -20 °C or above
+50 °C. AC adaptor cannot be operated under these circumstances.
36