Removing Waypoints From Routes - Furuno GP-1650DF Operator's Manual

ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
01
34 12.345'N
s
WPT001
135 54.321'W
02
34 23.456'N
WPT002
136 10.255'W
03
35 11.222'N
WPT003
136 55.889'W
04
35 22.878'N
WPT004
136 44.333'W
05
34 15.279'N
WPT005
135 34.111'W
DGPS 3D
Figure 7-4 Edit route menu
5. Press or to place the cursor at the
location where you want to insert a
waypoint.
6. Press the soft key INSERT WPT to show
the waypoint list.
ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
01
34¡.12.345'N
LOCAL LIST
WPT001
135¡.54.321'W
02
001
34¡.23.456'N
WPT002
136¡.10.255'W
03 002
35¡.11.222'N
WPT003
136¡.55.889'W
04
003
35¡.22.878'N
WPT004
136¡.44.333'W
05
34¡.15.279'N
004
WPT005
135¡.34.111'W
DGPS 3D
Figure 7-5 Waypoint list for editing
a route (Local list)
7. Press or to select the waypoint you
want to insert. You can switch between
the local list and alphanumeric list by
pressing the soft key LOCAL LIST or
ALPH LIST.
8. Press the soft key SELECT WPT.
Inserting waypoints on the plotter
display
Inserting waypoints before the first
waypoint or after the last waypoint
1. Press the [WPT/RTE] key followed by the
soft key ROUTES to open the route menu.
2. Press or to select the route desired.
3. Press the soft key EDIT ROUTE.
EDIT
ROUTE
LEG
INSERT
204.8
WPT
33.83nm
REMOVE
22.0
WPT
34.27nm
CHANGE
WPT
35.1
2.89nm
COORD
125.6
TYPE
31.25nm
RETURN
RETURN
EDIT
ROUTE
LEG
SELECT
204.8¡
WPT
WPT010
33.83nm
33 22.125'N
COORD
136 44.369'W
22.0¡
TYPE
WPT011
34.27nm
33 22.130'N
LOCAL
136 44.355'W
LIST
35.1¡
WPT012
2.89nm
33 22.111'N
ALPH
136 44.365'W
125.6¡
LIST
WPT013
31.25nm
33 22.200'N
136 44.113'W
RETURN
CANCEL
4. Press the soft key PLOT to show the plot-
ter screen.
5. Operate the cursor to place the cursor on
the waypoint which you want to insert.
6. Press the soft key ADD TO START.
7. Operate the cursor pad to place the cur-
sor on an existing waypoint (soft key ADD
WPT appears) or new location (soft key
ADD NEW WPT appears).
8. Press the soft key ADD WPT (ADD NEW
WPT).
9. Press the [ENTER] key.
When you want to insert waypoints after the
last waypoint, press the soft key "ADD TO
END" at the step 6.
Inserting waypoints in an intermediate
location within a route
1. Follow steps 1 through 4 in "Inserting
waypoints before the first waypoint or af-
ter the last waypoint."
2. Operate the cursor pad to place the cur-
sor on a line connecting waypoints.
3. Press the soft key SPLIT LEG. The se-
lected line turns red.
4. Operate the cursor pad to place the cur-
sor on an existing waypoint (soft key IN-
SERT WPT appears) or new location (soft
key INSERT NEW WPT appears). Press
the appropriate soft key.

Removing waypoints from routes

Removing route waypoints through the
route list
1. Press the [WPT/RTE] key followed by the
soft key ROUTES to open the route menu.
2. Press or to select the route desired.
3. Press the soft keys EDIT ROUTE and
LOCAL LIST to show the waypoint list.
4. Press or to select the waypoint you
want to delete.
5. Press the soft key REMOVE WPT.
7-3