Controls & Components - Grizzly G0490W Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–5 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Control Panel
A
Figure 1. STOP/START button locations.
A. STOP Button: Stops motor and cutterhead
when pushed. While remaining depressed,
prevents motor from being restarted. Reset
by twisting clockwise until it pops out. Once
reset, motor can be restarted.
B. START Button: Starts motor when pressed
(only if STOP button has been reset).
-4-
manual BEFORE
B
Table Controls
D
C E
H
Figure 2. Location of main table controls.
C. Outfeed Table: Supports workpiece after it
passes over cutterhead. For optimum results,
outfeed table must be properly adjusted
even with highest point of cutterhead knives/
inserts (refer to Page 46 for more details).
D. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel joining.
E. Table Locks: Tighten to secure position of
infeed and outfeed tables; loosen to allow
vertical table movement with adjustment
levers.
F. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead knives/inserts deter-
mines depth of cut.
G. Infeed Table Adjustment Lever: Adjusts
position of infeed table (when infeed table
lock is loosened).
H. Outfeed Table Adjustment Lever: Adjusts
outfeed table position (when outfeed table
lock and positive stop bolts are loosened).
Model G0490W/G0490XW (Mfd. Since 5/16)
F
G