Identification - Grizzly G0490W Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Outfeed
Table
Outfeed Table
Adjustment Lever
Outfeed Table
Lock
For Your Own Safety Read Instruction Manual Before Operating Jointer
a) Wear eye protection.
b) Always keep cutterhead and drive guards in place and in proper operating condition. ALWAYS
replace cutterhead guard after rabbeting operations.
c) Never make jointing or rabbeting cuts deeper than
d) Always use hold-down or push blocks when jointing material narrower than 3" or surface
planing material thinner than 3".
e) Never perform jointing, planing, or rabbeting cuts on pieces shorter than 8" in length.
Model G0490W/G0490XW (Mfd. Since 5/16)

Identification

Cutterhead
Fence
Guard
Fence Tilt
Handle
Fence
Lock
Lever
Control Panel
Infeed Table
Lock
Pedal
Assembly
Tilt
Plunger
Tilt Lock
⁄ " or planing cuts deeper than
1
8
Depth-of-Cut
Scale
Infeed
Table
Infeed Table
Adjustment Lever
Dust Port
⁄ "
1
16
-3-