How To Use User Data; How To Use Scene File Data - Panasonic AJ-PX5000G Operating Instructions Manual

Reading setup data written to SD memory card
Select the type of menu to read beforehand in the main menu → [FILE] → [SETUP DATA SELECT].
1
Select [LOAD] in the main menu → [FILE] → [SETUP DATA (SD CARD)], and press the jog dial button (or <SET> button).
A list of setup files stored in the specified folder in the SD memory card is displayed.
2
Select the file name to read, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading is complete.
3
Select [YES], and press the jog dial button (or <SET> button).
Loading of the file begins.
For details on error messages if an error message is displayed, refer to "Warning/error displays in the thumbnail operation, menu operation, and
USB storage mode" (page 223).

How to use user data

The content of setting data can be written to and read written data from user area on the camera's internal memory.
Use of this data allows you to quickly reproduce optimum setup states.
Writing setting data to user area
1
Select [SAVE USER DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
2
Select [YES], and press the jog dial button (or <SET> button).
3
When the completion message is displayed, press the jog dial button (or <SET> button).
Reading written user data
1
Select [LOAD USER DATA] in the main menu → [FILE], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.
2
Select [YES], and press the jog dial button (or <SET> button).
Reading out of the file begins.

How to use scene file data

The content of setting data can be written to and read written data from scene file area on the camera's internal memory. Four types of scene files can
be registered. Use of this data allows you to quickly reproduce optimum setup states.
Writing setting data for scene files
1
Select [SAVE] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene files currently saved in camera memory is displayed.
Chapter 4 Adjustments and Settings for Recording — Handling setting data
– 94 –