Camera Led States; Camera Notifications - Avaya H175 User Manual

• For external mount:
1. Position the camera on the external monitor and open the camera leg to balance the
camera properly.
2. Plug one end of the camera cable into the camera connector of the Collaboration Station.
Plug the other end into the connector in the camera.
3. Plug one end of the video cable into the video display out connector of the Collaboration
Station. Plug the other end into the video display in connector of the external monitor.
Related links
Hardware setup and login
Camera on page 60

Camera LED states

The front panel of the camera contains a red LED that turns on when the camera is capturing
pictures. The LED has the following states.
State
Off
Steady on
Blink
Related links
Camera on page 60

Camera notifications

The camera provides the following notifications on the Top Bar.
Notification
Camera update in
progress
Incorrect camera
connection
Unsupported device
on the camera port
Camera firmware
required
Related links
Camera on page 60
April 2016
on page 45
Description
Camera is not connected or video is blocked.
Camera is operating and capturing live video.
Camera is powered up and the Collaboration Station is performing the camera
software update.
Description
Indicates that camera upgrade has started.
Indicates that the camera is connected to the wrong port.
Indicates that an unsupported device is connected to the camera port.
Indicates that the camera software upgrade is required.
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
Camera
63