Chapter 13: Sip Telephony; Shared Control; Group Paging - Avaya H175 User Manual

Chapter 13: SIP telephony

Shared control

The Collaboration Station supports shared control with Avaya one-X
control mode, you can control the following features on the Collaboration Station:
• Start an audio call with Avaya one-X
• End an audio or a video call with Avaya one-X
• Put or remove a call on hold with Avaya one-X
• Put the Collaboration Station on mute with Avaya one-X
• Perform unattended transfer with Avaya one-X
• Start a conference by:
- Merging two calls with Avaya one-X
- Adding a contact to an active call with Avaya one-X
• Use Dual Tone Multi-Frequency (DTMF) to avail conference features with Avaya one-X
Communicator.

Group paging

Using the group paging feature, you can make a call to a group of users that your administrator sets
up for you. A group page supports one-way audio, that is, when you send a group page, only you
can speak . The called members cannot respond to your page. The page continues until you end it.
However, the members can drop out from the page if required.
The Collaboration Station treats an answered group page call as a normal call. You cannot perform
operations such as hold and transfer on the group page call. A group page member can receive a
page only if:
• All call appearances on the Collaboration Station are idle.
• The Collaboration Station is not playing any audio.
Use the group pilot number to send a group page. Contact your administrator to know about the
group pilot.
April 2016
®
Communicator.
®
Communicator.
®
Communicator.
®
Communicator.
®
Communicator.
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
®
Communicator. In the shared
®
Communicator.
®
Communicator.
®
144