Configuration
Setting the audio path
About this task
Use this procedure to set your Collaboration Station to go off-hook on the speaker or a headset
when you make a call.
Procedure
1. Go to the Settings screen.
2. Tap Call settings > Default audio path.
3. Select one of the following options:
• Speaker
• Headset
Related links
Call settings
on page 153
Configuring the wireless headset signaling
About this task
Perform this task to specify whether the wireless headset must provide incoming call alerts.
Procedure
1. Go to the Settings screen.
2. Tap Call settings > Headset signaling.
3. Select one of the following options:
• None: Disables signaling between the wireless headset and the Collaboration Station. To
use the handset, you must press the Headset button on the Collaboration Station and
then the Call control button on the headset.
• Switchhook &Alerting: Generates incoming call alerts on the headset. You can activate
or deactivate the Call control button on the headset by pressing the Headset button on
the Collaboration Station.
• Switching only: Disables incoming call alerts on the headset. You can activate or
deactivate the Call control button on the headset by pressing the Headset button on the
Collaboration Station.
Related links
Call settings
on page 153
April 2016
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
154