Outgoing Call Management; Dialing Modes - Avaya H175 User Manual

Call management
Related links
Voice mail on page 100
Transferring a call on page 83

Outgoing call management

The Collaboration Station provides various methods to make calls to contacts, such as manual
dialing or automatic dialing. This section describes those methods.
Related links
Call management on page 64

Dialing modes

on page 84
Audio and video calls
Input Panel on page 85
Making an audio call
Making a video call
Redialing a number
Adding a participant to an active call
Calling the alternate number of a contact
Making a call while on another call
Dialing modes
The Avaya H175 Video Collaboration Station supports two dialing modes:
• Manual: After you enter a number, you must manually start the call by tapping or pressing the
appropriate button. You can:
- Edit the number that you enter.
- Call multiple contacts.
- Select the call media − audio or video.
• Automatic: After you enter a number, the Collaboration Station automatically starts the call .
You cannot select the call media because the Collaboration Station uses the default media to
make the call. You can:
- Delete, but not edit, the number that you enter.
- Call only one contact.
Automatic dial mode is the default mode.
Related links
Outgoing call management
Setting the dial mode
April 2016
on page 85
on page 86
on page 87
on page 88
on page 88
on page 88
on page 89
on page 84
on page 155
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
84