Avaya H175 User Manual page 149

Name
Ethernet
PC Ethernet
IEEE 802.1x authentication
Supplicant mode
Pass through mode
EAP Type
802.1x credentials
LLDP
LLDP Mode
Received LLDP port
description
Received LLDP system
name
Received LLDP system
description
Received LLDP
management address
VLAN
VLAN tagging (802.1Q)
VLAN
VLAN test timer
IP interface
Use DHCP
Static IP settings
Power over Ethernet (PoE)
Single port PoE injector
connected
Max PoE power (watts)
Static IP settings
Name
IP Address
Netmask
Default router
April 2016
Description
Specifies the Ethernet mode.
Specifies the PC Ethernet mode.
Specifies the pass through mode.
Specifies the EAP type.
Specifies the 802.1x credentials-identity and password.
Specifies the mode for LLDP. Choose one of the following options:
• Disabled
• Enabled
• Auto
Specifies the status that whether the LLDP port description is received.
Specifies the status that whether the LLDP system name is received.
Specifies the status that whether the LLDP system description is received.
Specifies the status that whether the LLDP management address is received.
Specifies the VLAN tagging mode.
Specifies the VLAN ID.
Specifies the VLAN test timer.
Specifies whether to use DHCP to automatically generate the IP address.
Specifies the fields for assigning static IP address.
Specifies whether Single port PoE injector is connected to the device.
Specifies the maximum power for the PoE.
Description
Specifies the IP address.
Specifies the netmask.
Specifies the default router.
Using Avaya H175 Video Collaboration Station
Comments on this document? infodev@avaya.com
Wi-Fi and network settings
149