Paper Load Tear-Off - Intermec easycoder f2 Installation & Operation Manual

Paper Load
Tear-Off
1
Open the side door.
Intermec EasyCoder F2 – Installation & Operation Ed. 2
The EasyCoder F2 can print on labels, tickets, tags, and paper strip in
various forms. This chapter describes the case when the paper strip is
to be torn off manually against the printer's tear-off edge.
Use the <Feed> key (see fi gure #10) when loading the same type of
paper as before. When switching to a new type of media or when the
printer does not feed out the paper properly, simultaneously press
the < Shift> and <Feed> keys.
Tear-off can be used for:
• Non-adhesive continuous paper strip
• Self-adhesive continuous paper strip
• Self-adhesive labels on backing paper
• Tickets with gaps, with or without perforations
• Tickets with marks, with or without perforations
2
Turn the printhead lift knob clockwise to lift
Chapter 5
the printhead.
29