Chapter 5 Paper Load
Peel-Off, cont'd.
3
Pull out the handle to collapse the rewinder,
then remove the backing paper.
5
Hook a new roll of direct thermal labels on the
paper supply hanger and adjust the guide so
the label roll comes in fl ush with the wall.
36
4
Remove any empty paper core from the paper
supply hanger.
6
Remove labels from the fi rst 50 cm (20")
of the web. Thread the backing paper through
the print mechanism and push it inwards
as far as it will go.
Intermec EasyCoder F2 – Installation & Operation Ed. 2