Replacing The Sd Vflash Card - Dell PowerEdge M830 Owner's Manual

Blade server
Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

You can use an SD vFlash card with your system. The card slot is on the IDSDM card. You can remove
and install the SD vFlash card.

Replacing the SD vFlash card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
Steps
1.
If installed, remove the SD vFlash card from the card slot.
NOTE: The SD vFlash card slot is below the NDC.
Figure 27. Removing the SD vFlash card
1.
SD vFlash card
2.
SD vFlash card slot
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fc830Fhb

Table of Contents