Replacing The Sd Vflash Card - Dell PowerEdge M630 Owner's Manual

Youcan use an SD vFlash card withyour system. The card slot is on the system board. Youcan remove and install the SD vFlash
card.

Replacing the SD vFlash card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
1. Follow the safety guidelines listed in safety instructions section.
2. Followthe procedure listed in the Beforeworking inside yoursystem section.
Steps
1.
If installed, remove the SD vFlash card from the card slot.
NOTE:TheSDvFlashcardslotisnear belowthe NDC.
2.
Insert the contact-pin end of the SD card into the card slot on the vFlash media unit.
NOTE: The slot is keyed to ensure correct insertion of the card.
3.
Press inward on the card to lock it into the slot.
Figure 29. Replacing the SD vFlash card
1. SD vFlash card
3. SD vFlash card slot identification label
76
2. SD vFlash card slot