Sd Vflash Card; Replacing The Sd Vflash Card - Dell PowerEdge M630p Owner's Manual

Related tasks
Before working inside your system
Removing the optional rSPI card
After working inside your system

SD vFlash card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent on-demand local
storage and a custom deployment environment that allows automation of server configuration, scripts, and imaging. It emulates USB
devices. For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
You can use an SD vFlash card with your system. The card slot is on the system board. You can remove and install the SD vFlash card.

Replacing the SD vFlash card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. If installed, remove the SD vFlash card from the card slot.
NOTE: The SD vFlash card slot is near below the NDC.
2. Insert the contact-pin end of the SD card into the card slot on the vFlash media unit.
NOTE: The slot is keyed to ensure correct insertion of the card.
3. Press inward on the card to lock it into the slot.
on page 51
on page 79
on page 52
Installing and removing server module components 81