I/O Module Mezzanine Cards; Mezzanine Card Installation Guidelines - Dell PowerEdge M830 Owner's Manual

Figure 15. Installing the memory module
1. memory module
3. memory module socket ejector (2)
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. Press F2 to enter System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the installed memory.
3. If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory module is firmly seated in the memory module socket.
4. Run the system memory test in system diagnostics.
Related Links
Safety instructions
Before working inside your system
Installing the cooling shroud
Removing memory modules
After working inside your system

I/O module mezzanine cards

Your system supports a variety of optional mezzanine cards. If installed, the mezzanine card(s) must be
used in conjunction with a matching I/O module(s).
For more information on I/O modules, see "Guidelines for Installing I/O Modules" in the M1000e
Enclosure Owner's Manual at dell.com/support/home.

Mezzanine card installation guidelines

The blade supports up to four mezzanine cards:
76
2. alignment key