Dell PowerEdge M830 Owner's Manual page 152

a. internal USB key
b. SD vFlash card
c. IDSDM card orrSPI card
d. NDC
e. mezzanine cards
f. expander card
g. storage controller card
h. hard-drive cage or SSD cage
i. hard-drive backplane or SSD backplane
j. hard drives or SSDs
NOTE: Ensure that you reinstall the hard drives or SSDs in their original locations.
k. cooling shroud
l. memory modules
m. processor(s) and heat sink(s)
2. Remove the plastic I/O connector covers from the back of the system.
3. Follow the procedure listed in the After working inside your system section.
4. Import your new or existing iDRAC Enterprise license. For more information, see the iDRAC8 User's
Guide at Dell.com/idracmanuals.
5. Ensure that you:
a. Use the Easy Restore feature to restore the Service Tag. For more information, see the
Restoring the Service Tag by using Easy Restore section.
b. If the Service Tag is not backed up in the backup flash device, enter the system Service Tag
manually. For more information, see the Entering the system Service Tag section.
c. Update the BIOS and iDRAC versions.
d. Re-enable the Trusted Platform Module (TPM). For more information, see the Re-enabling the
TPM for BitLocker users or Re-enabling the TPM for Intel TXT users section.
Related Links
Safety instructions
Before working inside your system
Removing the system board
After working inside your system
Restoring the Service Tag by using Easy Restore
Use the Easy Restore feature if you do not know the Service Tag of your system. The Easy Restore feature
allows you to restore your system's Service Tag, license, UEFI configuration, and the system configuration
data after replacing the system board. All data is backed up in an rSPI card automatically. If BIOS detects a
new system board and the Service Tag in the rSPI card, BIOS prompts the user to restore the backup
information.
1. Turn on the system.
If BIOS detects a new system board, and if the Service Tag is present in the rSPI card, BIOS displays
the Service Tag, the status of the license, and the UEFI Diagnostics version.
2. Do one of the following:
• Press Y to restore the Service Tag, license, and diagnostics information.
152