Dell PowerEdge M830 Owner's Manual page 102

Figure 34. Removing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Next steps
1. If you are removing the processor permanently, install the processor blank.
2. If you are removing the processor permanently, install the processor/DIMM blank. If you are
installing a new processor, see the Installing a processor section.
3. Install a processor.
4. Install the heat sink.
5. Reinstall the cooling shroud.
6. Follow the procedure listed in the After working inside your system section.
102
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)