Table of Contents
Advertisement
Mounting the unit on a tripod
Use the tripod attachment available as an optional
accessory for mounting the unit onto a tripod.
1
Attach the tripod attachment to the tripod.
<Note>
Select the attachment holes that best support the
center of gravity of the unit and tripod attachment.
Check that the diameters of the selected holes
match the diameters of the pan head.
Tripod attachment
2
Attach the camera to the tripod attachment.
Slide the camera toward the front along the
grooves until it clicks into place.
Detaching the unit from the tripod attachment
While pressing the red lever, move the black lever in
the direction of the arrow, slide the unit toward the
rear, and detach it.
<Note>
If the pins in the tripod attachment fail to return to
their original positions after the camera has been
detached, press the red lever again and at the same
time move the black lever in the direction of the
arrow: this will return the pins to their original
Pan head
positions.
Bear in mind that the camera cannot be attached
while the pins are left in the center.
35
Tripod attachment
Black lever
Red lever
Advertisement
Table of Contents
