Table of Contents
Advertisement
Setup card operations
Saving the data settings on the
card
1
Perform the menu operations (pages 70 to 72),
and display the "CAM CARD READ/WRITE"
screen.
n
Select the file No.
2
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes after
WRITE, and press the JOG dial button.
n
3
Turn the JOG dial button to select a number from 1
to 8, and press the JOG dial button.
Give a title to the selected file.
4
Turn the JOG dial button to move the arrow
(cursor) to the TITLE item.
5
When the JOG dial button is pressed, the arrow
(cursor) starts flashing, and the input mode is
established.
6
Turn the JOG dial button until the character to be
set appears.
When the button is turned, the
character displayed is switched in the following
sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ', >, <, /, –
7
Press the JOG dial button to enter the character.
8
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
5
7
steps
to
to set the characters (maximum of 8).
61
m
m
Advertisement
Table of Contents
