Mounting The Unit On A Tripod; Detaching The Unit From The Tripod Attachment; Attaching The Viewfinder And Microphone; Attaching The Shoulder Belt - Panasonic DVCPRO AJ-D410AP Operating Instructions Manual

Preparation

Mounting the unit on a tripod

Use the tripod attachment to mount the unit on a tripod.
1
Mount the tripod attachment on the tripod.
Tripod attachment
<Note>
Take account of the center of gravity of the unit and that of the
tripod attachment when selecting the attachment hole. Check that
the diameter of the hole selected matches the diameter of the tripod
head screw.
2
Mount the unit on the tripod attachment.
Slide the unit along the groove toward the front until it clicks into
place.
Detaching the unit from the
tripod attachment
Tripod attachment
Red lever
While pushing down the red lever, move the black lever in the
direction of the arrow and slide the unit toward the back to remove
it.
<Note>
If the pin of the tripod attachment fails to return to its original
position after the unit has been detached, again move the black
lever in the direction of the arrow while pushing down the red lever,
and return the pin to its original position. Bear in mind that the unit
cannot be attached if the pin remains in the center.
Tripod head
Black lever
13
Attaching the viewfinder and
microphone
For details on the attachment and adjustments of the viewfinder and
microphone, refer to the operating instructions of the viewfinder.

Attaching the shoulder belt

Shoulder belt
The tab opens
when it is
pressed.
To disengage the shoulder belt,
open the tabs of the attachment
parts, and disengage.
<Note>
Check that the shoulder belt is attached securely.
Attaching the wireless receiver
(optional accessory)
Remove the cover, insert the wireless receiver, and screw it down.
The tab opens
when it is
pressed.