Table of Contents
Advertisement
Setup card operations
Loading the data saved on the
card
1
Perform the menu operations (pages 70 to 72),
and display the "CAM CARD READ/WRITE"
screen.
n
Select the file No.
2
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes after
READ, and press the JOG dial button.
n
3
Turn the JOG dial button to select any number
from 1 to 8, and press the JOG dial button.
Load the data of the selected file.
4
Turn the JOG dial button to move the arrow
(cursor) to the READ item.
n
5
When the JOG dial button is pressed, the following
message appears.
n
6
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the data loading is completed, the following
message appears.
n
To load the VTR unit's data, open the VTR CARD
READ/WRITE screen, and perform steps
If one of the following messages appears when the JOG dial
button is pressed, the data cannot be loaded.
Error message
READ NG
NO CARD
(setup card has not been
inserted)
READ NG
FORMAT ERROR
(formatting error)
READ NG
NO FILE
(file not found)
READ NG
ERROR
(the data cannot be loaded)
7
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit's current statuses appears at the
top and bottom of the viewfinder screen.
63
4
6
to
.
Remedial action
Insert the card.
The card was formatted by a
device other than the unit.
Replace the card.
Save the file data.
Data saved by devices other than
unit cannot be loaded.
Advertisement
Table of Contents
