Table of Contents
Advertisement
Setting menu screens
GENLOCK/IRIS screen
The genlock and iris control settings are performed on
this screen.
Variable
Item
range
display
H PHASE
0
USER
COARSE
:
ENG
7
:
15
H PHASE FINE
0
USER
:
ENG
32
:
64
A. IRIS LEVEL
0
USER
:
ENG
82
:
100
A. IRIS
0
USER
PEAK/AVE
:
ENG
16
:
100
A. IRIS MODE
NORM1
USER
NORM2
ENG
CENTR
S. IRIS LEVEL
0
USER
:
ENG
100
The underlining in the variable range column indicates the setting in the preset mode.
(CAM MAIN MENU 3)
VF
Remarks
For coarsely adjusting the
H phase during genlock.
For finely adjusting the H
phase during genlock.
For setting the auto iris
target level.
The brightness (iris) is
controlled using this value.
The higher the value
selected, the higher the
brightness.
For setting the ratio
between the auto iris peak
and average value.
The closer the setting is to
0, the greater the
tendency toward average
control; conversely, the
closer the setting is to
100, the greater the
tendency toward peak
control.
For selecting the auto iris
mode.
NORM1:
The light is measured for
the entire screen (except
for the edges).
NORM2:
The light is measured for
the entire screen (except
for the top part).
CENTR:
The light is measured in
the center area of the
screen only.
For setting the super iris
target level.
(Backlight compensation
mode)
LENS ADJ screen
The lens adjustments are performed on this screen.
Variable
Item
range
F2.8 ADJ
ON
OFF
F16 ADJ
ON
OFF
<Note>
When using a lens which enables the open limit and close limit of
the lens aperture to be adjusted, set "F2.8ADJ" or "F16ADJ" to ON,
and repeatedly adjust so that the lens aperture will be set to "F2.8"
or "F16."
(This adjustment need not be performed if the lens does not have
this adjustment function.)
89
VF
Remarks
display
ENG
For outputting the voltage
output only when ON is
selected as this item's
setting.
ENG
For outputting the voltage
output only when ON is
selected as this item's
setting.
Advertisement
Table of Contents
