Table of Contents
Advertisement
Audio input preparation
When using a wireless microphone
Attach the WX-RJ700 wireless receiver when
Panasonic's wireless system is to be used.
1
Attach the WX-RJ700 wireless receiver to the WX-
ZJ770 camera attachment.
2
Align the grooves in the camera attachment with
the pins on the battery case, etc. to attach the
wireless receiver.
WX-RJ700 wireless
receiver
AUDIO IN connectors
AUDIO IN switches
3
Connect the AUDIO IN connectors on the camera
with the wireless receiver using the XLR cable.
4
Set the AUDIO IN switch or switches for the
channel or channels to which the XLR cable has
been connected to "REAR."
5
Set the LINE/MIC/+48V selector switch on the rear
panel to "MIC."
When detaching the wireless receiver, push up
the lever on the bottom panel of the camera
attachment to disengage it.
<Note>
For details on the operations and other aspects of the
WX-RJ700 wireless receiver, refer to the operating
instructions which accompany the receiver.
Audio output connectors
WX-ZJ770 camera
attachment
XLR cable
34
When connecting audio components
1
Connect the AUDIO IN connectors on the camera
with the audio component using the XLR cable.
2
Set the AUDIO IN switch or switches for the
channel or channels to which the microphone or
microphones have been connected to "REAR."
3
Set the LINE/MIC/+48V selector switch on the rear
panel to "LINE."
AUDIO IN switches
AUDIO IN connectors
LINE/MIC/+48V
selector switch
Advertisement
Table of Contents
