Table of Contents
Advertisement
Setting menu screens
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
Variable
Item
range
display
MIC LOWCUT
FRONT
USER
CH2
REAR
ENG
F&R
OFF
LIMITER
ON
USER
OFF
ENG
TEST TONE
NORMAL
USER
ALWAYS
ENG
OFF
CHSEL
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
The underlining in the variable range column indicates the setting in the preset mode.
(VTR MAIN MENU)
VF
Remarks
For setting the high-pass
filter for the CH2 mic input.
FRONT: The high-pass filter
for the front mic
input is set to ON.
REAR : The high-pass filter
for the rear mic
input is set to ON.
F&R
: The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
: The high-pass filter
for the CH2 input
is set to OFF.
For switching the audio
limiter to ON or OFF.
ON : The limiter operates.
OFF : The limiter does not
operate.
NORMAL:
The test tone signal is
output when the AUDIO
IN switch for CH1 is set
to front while BAR is
selected as the
CAM/BAR switch setting.
ALWAYS:
The test tone signal is
always output when BAR
is selected as the
CAM/BAR switch setting.
OFF:
The test tone signal is
not output.
CHSEL:
The test tone signal is
output for the selected
channel when the
AUDIO IN switch CH1 or
CH2 is set to front while
BAR is selected as the
CAM/BAR switch setting.
Variable
Item
range
REC CH3/CH4
CH1/2
CH3/4
CUE SELECT
SIDE SW
CH1
CH2
MIX
CUE REC
ON
OFF
99
VF
Remarks
display
USER
For setting the audio
ENG
signals to be recorded on
the CH3 track and CH4
track.
CH1/2:
The CH1 signal is
recorded on the CH3
track, and the CH2
signal is recorded on the
CH4 track.
CH3/4:
The CH3 and CH4
signals which are
supplied from the
camera adapter are
recorded.
USER
For setting the audio
ENG
signals to be recorded on
the cue track.
SIDE SW:
The signals selected by
the CUE switch on the
side panel are recorded.
CH1:
The CH1 signals are
recorded.
CH2:
The CH2 signals are
recorded.
MIX:
The CH1 and CH2
mixed signals are
recorded.
USER
For setting whether
ENG
signals are to be recorded
on the cue track.
ON : The signals will be
recorded on the cue
track.
OFF : The signals will not
be recorded on the
cue track.
The power-saving
mode is established.
Advertisement
Table of Contents
